Custom REGULAR DTF Transfers

 *** THIS LISTING IS FOR ONE SINGLE IMAGE/DESIGN TRANSFER***

Full color, custom no-weeding heat transfer that is digitally printed and ready to press. Can be applied to cotton, poly, or blends in any color. Submit your artwork* in transparent PNG with 300 dpi.

**This listing is for PRINT READY FILES ONLY.  Your file will be sent directly to the printer as is.  Please make sure your image file for the size transfer you need has no empty margins! We will not crop your image. 

Artwork Requirements:

• Files should be 300 dpi or greater. Files under this will result in low-quality prints. If your file has a white background, the white WILL print.   Please double-check your files. WE WILL NOT EMAIL OR MESSAGE YOU TO FIX IT. 
• Accepted file types: PNG. ONLY
• Remove the background of your image before sending
• Do not mirror the files, we will do that for you.
• By submitting the image you declare you have the copyright to print the image
• Colors printed vs colors on your screen might vary. Computerized images are usually RGB while printers print in CMYKW. If the file you uploaded is RGB colors, saturation, etc could be off. We will NOT adjust saturation, contrast, brightness. We print as is.
• Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise. 
• CMYK color profile, no color matching.
• Micro lines do not do well with DTF as the adhesive will not have enough white/ink to stick to.

All transfers are non-refundable and non-returnable. We cannot print copyrighted images. We are not responsible for incorrectly applied transfers or errors in artwork submitted to us. We are not responsible for grainy, low dpi or blury transfers. Please check your images before submitting them. Best quality for best prints. Low quality, low quality prints

*possible small specks of dust may be present in tranfers as it is impossible to keep the air 100% clean of particles of dust.  No refunds for any reason will be given on DTF transfers. 

-----------------------------------------------------------

How To Press DTF Transfers: 

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary. We highly recommend a heat gun to accurately read the temperature of your heat press.  

• Using a heat press is recommended. We do not recommend using a circuit easy press or iron. 
• Preheat press to 310F and set for high pressure 
• Prepress your item for approx 5 seconds to eliminate moisture. 
• Set transfer on item (you should be able to see your image right side up) and cover with Teflon and press for 10 seconds
• Peel Cold! FULLY COLD!
• Remove film slowly.
• Repress for 10 seconds using Teflon paper on top of design.
• You should see the fabric texture through your design. 

WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

Recommend Wash Instructions:

• Do not wash garment for approx 48 hours after applying transfer
• Do not use fabric softener
• Do not bleach
• Do not iron design
• Wash inside out
• Air or Tumble Dry