RTS *GLITTER DTF*:Pink Out Pattern - (10” Wide)

All transfers are non-refundable and non-returnable. We are not responsible for incorrectly applied transfers. 

*possible small specks of dust may be present in tranfers as it is impossible to keep the air 100% clean of particles of dust.  No refunds for any reason will be given on DTF transfers. 

-----------------------------------------------------------

How To Press DTF Transfers: 

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary. We highly recommend a heat gun to accurately read the temperature of your heat press.  

• Using a heat press is recommended. We do not recommend using a circuit easy press or iron. 
• Preheat press to 310F and set for high pressure 
• Prepress your item for approx 5 seconds to eliminate moisture. 
• Set transfer on item (you should be able to see your image right side up) and cover with Teflon and press for 10 seconds
• Peel Cold! FULLY COLD!
• Remove film slowly.
• Repress for 10 seconds using Teflon paper on top of design.
• You should see the fabric texture through your design. 

WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

Recommend Wash Instructions:

• Do not wash garment for approx 48 hours after applying transfer
• Do not use fabric softener
• Do not bleach
• Do not iron design
• Wash inside out
• Air or Tumble Dry